• Thermador Manuals

Clean stainless steel areas by using mild, soapy water with a soft cloth. Wipe in the direction of the stainless steel grain when washing and drying. Rinse with water and wipe dry to avoid watermarks. Do not use cleaning agents that are abrasive or contain chlorine since both are corrosive to stainless steel. For added shine, apply stainless steel conditioner and wipe off excess with a soft cloth.Warning: Stainless steel conditioners and cleaners can have negative effects on materials other than stainless steel. Do not apply stainless steel conditioners and cleaners to control labels, logos, or black stainless steel.The Thermador Stainless Steel Conditioner (part # 00576697) is available for purchase in the. View the Thermador YouTube Channel to learn.

1) Gently place grease-saturated ceramic briquettes in a 6 quart or larger pot.2) Fill the pot with clean water so that all ceramic briquettes are covered at least ½' deep.3) Bring the water to a steady boil. Once reaching a steady boil, continue to boil for 10 minutes.4) Remove from heat and allow ceramic briquettes to cool to a safe temperature.5) Pour water off of ceramic briquettes and pat them dry on old towels or paper towels.6) Allow ceramic briquettes to air dry for at least two hours.

Some visible grease stains may remain on briquettes after cleaning.7) Reassemble clean, dry briquettes back into the grill before using the grill again.CAUTION: Ceramic briquettes must be replaced when they begin to turn black. This means that theyare saturated with fat and may smoke heavily during operation or the fat may catch fire.Ceramic briquettes can be purchased from the. There are several solutions to this problem:.

The igniter ports may be dirty. Carefully wipe the igniter with a cotton swab dampened with water after the igniter has cooled down.

Thermador Manuals

Gently scrape soil off with a toothpick. Avoid exposing the igniters to excessive water as a damp igniter may not light up. Remove any lint that may remain after cleaning. Ignition will be quicker if a cooking pan is in place on the grate.

Ignite the gas at full and once alight, turn down to around 50%. It should lock on within 6 seconds. The main gas supply may not be turned on. Make sure it is turned on. Does the burner click when the burner knob is in the ON position? If yes, you may have a wiring issue at the outlet that the appliance is connected to.

Turn off the main gas supply and contact a qualified electrician to fix this. Does the burner click when the burner knob is in the OFF position?

If yes, check for the following:. 1.

Burner caps are properly placed and the igniter is not wet or dirty. 2. Check to see if the regulator supplied with the unit is installed properly. The arrow on the regulator should be pointing to the appliance. Please call a professional installer orif the regulator has not been installed properly. There are several solutions to this problem.

The knobs may be in the LIGHTING/SPARK position. Turn the knobs to the OFF position. Make sure there is no draft in the room. Select models have a re-ignition function, which is part of the flame recognition feature. The re-ignition function will attempt to reignite a flame that has been blown out or disturbed. This may be caused by the presence of water due to cleaning the cooking surface with excess water or water boiling over onto the cooking surface and entering the appliance.

This problem will cure itself once the cooking surface dries out. If you have tried all of the above and the problem continues, you will need an authorized service technician to dismantle the appliance and repair it.

You should never attempt to dismantle a gas appliance unless you are officially qualified to do so. Please.For cooktops purchased after September 2018, the ignition spark operates continuously if a knob is held down past the child lock position. There are several solutions to this problem:. When an electrical power connection has been activated at the first power up or reconnected after an outage, the igniters may spark once or twice even though all burner knobs are in the OFF position. If igniters continue to spark.

This may be caused by the presence of water from cleaning the cooking surface or water boiling over onto the cooking surface and entering the appliance. This problem will cure itself once the cooking surface dries out. If the problem persists after several days. The igniter box may have failed and you will need to.

This may be due to an error in the baking technique (human error) or the oven may not be performing optimally. Performing the Biscuit/Cookie Bake Test will let you know if the cause is human error or oven error. We use this test to help develop our ovens:1. Purchase Pillsbury Grands Biscuits or Pillsbury Sugar Cookies.

They are “unbaked” and can be found in the refrigerated section of most grocery stores.2. Use a shiny, aluminum cookie sheet that is 12 x 15” or larger.3. Follow package instructions for laying the biscuits/cookies out on the cookie sheet. Failure to follow package recommended spacing will negatively affect bake results.4. Do not put the cookie sheets into the oven until PREHEAT is finished.5. If baking one cookie sheet, place it on rack position 3. If baking two cookie sheets at once, place them on rack positions 2 and 4.6.

Follow package instructions for baking time.7. Do not open the oven door once the biscuits/cookies have been put into the oven. Use the oven light and window to view the biscuits/cookies if you wish.8. At the minimum baking time listed on the package, check the baking results through the window. If the biscuits/cookies are not baked to satisfaction, check them every minute and allow them to bake more until fully baked or until the maximum baking time listed on the package has been reached, whichever happens first.9. If the biscuits/cookies turn out well during the baking times noted on the package – this means the oven is performing properly and does not need a service visit.10. If the biscuits/cookies turn out overdone or underdone during the baking times noted on the package – this means the oven needs to be checked by an authorized Thermador servicer.

Please.View the Thermador YouTube Channel to learn(perform the bake test).